FIRMWARE AND SOFTWARE

Available for Minimus digitisers and Minimus integrated sensors, Discovery offers a single unified interface to a range of powerful tools for managing your seismic instrumentation, archiving your data and monitoring your network state-of-health.

Scream! is a Windows and Linux application for the Affinity digitiser and legacy Güralp digitisers and digital instruments. You can read more about Scream! and request a download on the Scream! webpage.

GüVü allows you to check the integrity of your installation in the field on your Android device. GüVü displays waveforms, orientation, temperature and humidity data allows you to lock/unlock/centre the masses of analogue sensors, reboot Minimus and alter sample rates without instrument disturbance.

GüVü is compatible with the Minimus /Minimus+ / Minimus Lite digitisers and Minimus integrated instruments.

Release Notes for Minimus; Minimus+; Certimus; Fortimus and Aquarius.

Release Notes for Minimus Lite, Minimus2 and Artius.

Platinum firmware is for the Affinity and NAM data and networking modules and legacy DM24SxEAM, DCM and 5TDE.

Find password reset instructions for digital instruments, digitisers and acquisition systems

Read the full Platinum manual.

Securing internet-connected Platinum systems

The DM24 digitiser is available as a stand-alone unit, integrated into instruments (such as the 5TD) and integrated with acquisition modules (such as the DM24S3EAM or the older DM24S3DCM). The DM24 underwent a significant design change in late 2005, when the Mk3 was introduced, but there are still many Mk2 units installed and giving good service. The two versions require different firmware. This page describes how to tell whether you have a Mk2 or a Mk3 DM24 digitiser.

This recovery procedure can be useful if the firmware has become damaged or corrupted by a partial upgrade.

Upgrading an EAM using a USB stick

This page describes the procedure for re-flashing a DCM to use Platinum firmware where the DCM has corrupt flash memory and cannot boot.

Release notes for upgrading DCMs to Platinum firmware

How to upgrade a DCM using a USB stick.

This page describes the procedure for re-flashing a DCM to use Platinum firmware where the DCM has corrupt flash memory and cannot boot.

This firmware is applicable to 3ESPCDs with integrated CD24 digitisers, newer 6TDs and CD24 digitisers.

For units with corrupt memory.

Firmware for the older 6TDs (those currently running a firmware version lower than v.200).

Legacy 5TDs running a firmware version v.0xx should upgrade to this last firmware version.

Firmware for the SAM and CRM.

Convert near-real-time data-streams to CD1 format.

Display seismic data on your website.

A software toolkit for building your own Linux applications to work with GCF data.